Adam’s Tire Armor is a semi-permanent tire clear coat that provides a high gloss, dry to the touch finish that will protect tires for many months. Adam’s Tire Armor forms a solid, durable coating, fortified with UV inhibitors, that remains flexible and locks out water, repels dirt, mud, dust and salts – keeping the tire cleaner for longer and easier to maintain. The durability of Adam’s Tire Armor can be measured in months and not days or weeks, compared to a conventional tire dressing.

Adam’s New Tire Armor is a spiritual successor to the previous formula of Adam’s Tire Armor. This updated formula provides a much higher gloss, not requiring multiple coats, and is even more durable with additional ease of application built into the formula. If you enjoyed Adam’s Tire Armor, Adam’s Tire Armor V2 is sure to impress!

High Gloss, Acrylic Polymer Tire Clear Coat – Non-Silicone
Extremely Durable, Long Lasting Tire Dressing
Dries to the Touch in Minutes & Impossible to Sling
Locks Out Water & Repels Dirt, Dust, Salts
Infused with UV Absorbing Agents
No Dye / No Fragrance (Safe On White Walls)

One of the main attributes we relate to a freshly detailed vehicle is tire dressing. Whether Satin and a rich black color, or the more glossy, wet look, it’s the finishing touch once your entire wash process is over. Your paint stays clean, beads water like crazy, and your windows stay fresh, but your tires are the first to fall off the wagon on a clean vehicle! Most tire shines are packed with silicone that provide a pleasant appearance at first, but wear away with just a few trips under even the most perfect conditions. Adam’s Tire Armor, a semi-permanent, acrylic layer that is here to stay, literally. Hit speed bumps, go off-road, run through the mud… Dressed tires are ready to rally now, thank to Tire Armor.

You’re probably thinking, “Acrylic… that sounds like paint!” and you’re not entirely wrong. Adam’s Tire Armor has successfully combined durability with functionality. Tire Armor creates an extremely flexible and elastic clear coat that not only adheres specifically to rubber, but lets your tire live like a tire everyday. When developing this product, we went through dozens of formulas ensuring the proper sheen was achievable with ease for our customers and incorporated our COAT technology for this reason! COAT stands for Customized Optional Acrylic Technology, meaning you can have that same satin finish from VRT OR the glossy appearance from Tire Shine. Just apply an additional coat after your introductory layer has been dry for about 15 minutes. Now, there are thousands of different tires out there, both new and old, so the amount of coats that works for one tire might not be the same as a fresh set from the tire shop— Applying a thorough base layer is key!

With any coating or protective layer, you want to make sure it’s as clean as possible before applying. Some tires will require 5 rounds of cleaning, some will require only 2! The way to ensure you’ve done a thorough job is when Tire & Rubber Cleaner suds up and looks white in appearance, rather than brown or orange! Once cleaned, you’ll want to ensure it's completely dry in the tread block and around the bead of the wheel— excess water builds up in the bead of the wheel, making it slowly drip out after washing!

Now for the application. Ensuring a thorough application of this product is key. Start by dispensing the product over the surface area of the tire, tread block, and sidewall lettering. Once applied, use a Microfiber Applicator or VRT Block to work the chemical into the tire. For larger tread blocks, we recommend either a trim and lug brush or interior brush to paint the chemical into the tread blocks' peaks and valleys! Thorough application is key as this product builds a super thin layer of acrylic. If there is a high or low spot, it will be the first to go and cause a “skin peel” and ultimately wear away faster!

Adam’s Tire Armor is dry to the touch in 5-7 minutes, but you’ll want to wait about 10-15 minutes before applying additional coats for increased gloss! Once that’s all done, you can drive off into the sunset and enjoy no-sling, dressed tires wherever you go.

Adam’s Tire Armor is a semi-permanent coating for rubber tires. Over-applying can cause drips in the final result, so be sure to work the product thoroughly into the surface and allow proper dry time. Adam’s Tire Armor is not a conventional tire dressing; spraying on and walking away will result in uneven coverage that will need to be removed before being reapplied.

Instructions:

Clean tires thoroughly utilizing Adam’s Wheel & Tire Cleaner. Tires must be absolutely clean prior to applying the Adam’s Tire Armor – this is critical!
Allow the tires to dry or wipe off any excess water and ensure surface is clean before proceeding.
When ready, wipe the coating onto the tire face utilizing an appropriate applicator, such as an Adam’s Hex Grip or Block Applicator. Work the product into any grooves, lettering or channels on the tire face and be sure to use sufficient product to thoroughly coat the surface. Adam’s Tire Armor cures dry to the touch, so work quickly when applying in hot temperatures and always avoid applying on a hot surface.
Allow to cure for approximately 15 minutes to become dry to the touch. Wipe off any residue or drips that may have ended up on a wheel face. Do not introduce moisture to the surface for the first 24 hours to avoid the coating reacting with water.
Additional coats can be applied, but are not necessary, allowing an hour of cure between coats.

Common Sense Warning:

Adam’s Tire Armor is a semi-permanent coating for rubber tires. Over-applying can cause drips in the final result, so be sure to work the product thoroughly into the surface and allow proper dry time. Adam’s Tire Armor is not a conventional tire dressing; spraying on and walking away will result in uneven coverage that will need to be removed before reapplication.

As this product is a semi-permanent tire dressing, it is not designed to come off easily using conventional degreasers and rubber cleaners. For removal steps, please call Adam’s HQ at 866-965-0400

View Tire Armor Coating SDS

$17.76 Collection

Price

Collections